Text Box:

Why buy TWO when ONE will do? The Flink Model HD-8 is a rugged remarkable spreader for doing two jobs equally well: Ice control and Seal coating. The HD-8 is hydraulically-powered and cab-controlled to furnish fast, uniform, seal coating and ice control with dependable performance season after season. An all-around workhorse for your all-around needs. Options are available upon request. More Info

The Flink Roll Spreader will handle a variety of granular materials, with the ability to unload over the tailgate without removing the spreader. Captive, hinged end covers on end plates provide easy access to chain drive and gate adjust mechanism. The spreader mounts on the rear of the dump body with “Quick Detach” mounting hardware. More Info

The under tailgate spreaders offer single augers, dual augers, and dual purpose spreaders for standard dump bodies, and a single auger unit for 1 ton and super duty bodies. The VCT series all have a lower hinged trough for easy clean-out. More Info

Standard Features

Urethane Spinner will

not rust or corrode. More effective material dispersal with less waste.

Self Leveling spinner assembly allows spinner disc to remain parallel to road surface, regardless of position of Dump Body.

VCT 11

Under-Tailgate Spreader

Trough cover plate the cover

plate is the full width, full length type hinged design to permit dumping of any material over the spreader with no accumulation of material in the spreader trough.

FLS18

Under-Tailgate Spreader

Standard Features

Self-leveling mounting with quick attach/detach hardware.

Bi-directional operation allows for right or left hand discharge.

Adjustable feed gates are hinged at each end of conveyor.

18” wide chain with High-temperature belt riveted to each drag bar.

Spreads a wide variety of materials

including aggregates and hot mix asphalt.

Performs shoulder maintenance, asphalt-patching,

ice control, rut-filling, and earthen conveying. Mounts

At rear of dump body below regular dump

box tailgate. More Info

Standard Features

Main agitator extends across full width of spreader. Replaceable without dismantling machine.

Thickness of spread governed by width of gate opening, ground speed of truck and various optional attachments.

Hydraulic Motor is high

torque, low speed gerotor type.

HD-8

Replacement Tailgate Spreader

Tail-gate replacement type completely replaces dump-body tail-gate held in place by dump-body tail-gate hardware. All steel construction ARC welded throughout.

RF 8

Under-Tailgate Spreader

Standard Features

Quick detach mounting hardware.

Adjustable gate manual or hydraulic

Spring loaded anti-flow plate (four section)

Hydraulic Motor is high torque, low speed Char-Lynn motor, mounted on an adjustable bracket.

The VCT 12 offers a reverse flited auger which pulls material from the left as well as the right side of load. A baffle plate over the discharge opening prevents loss of material when machine is not running. More Info

Standard Features

Urethane Spinner will

not rust or corrode. More effective material dispersal with less waste. Spinner Assembly always remains parallel to road surface, regardless of position of Dump Body.

VCT 12

Under-Tailgate Spreader

Trough cover plate the cover plate is the full width, full length type hinged design to permit dumping of any material over the spreader with no accumulation of material in the spreader trough.

VCT 13

Under-Tailgate Spreader

Standard Features

Lower Hinged Cleanout Door

Quick Disconnect Mounting Hardware

Spinner Assembly Always Remains Parallel To Road Surface, regardless of position of Dump Body.

Prevent Bridging and ensure continuous flow of material

with the Flink VCT 13 Dual Auger Under Tailgate Spreader.

Truly a one man spreading machine for salt, chloride, cinders or sand.

More Info

VCT 90

Under-Tailgate Spreader

Standard Features

Quick detach mounting hardware.

Urethane Spinner will

not rust or corrode. More effective material dispersal with less waste.

Urethane Spinner will not rust or corrode.

More effective material dispersal with less waste.

Berm Chute is self-storing and adjustable for alteration of material flow.

Self Leveling spinner assembly allows spinner disc to remain parallel to the road at any dump body angle.

The VCT 90 has a Heavy Duty 9” auger, directly coupled to a High Torque hydraulic motor through a stainless steel coupler. The hinged lower trough swings clear to allows material to fall through the auger area to simplify clean-out and removal of any blockage. More Info

Specifications Subject to Change Without Notice.

Text Box:

© 2005 - 2014 Flink Co. All Rights Reserved.

The Flink Replacement Tailgate Spreader (FRTS) completely replaces dump body tailgate, held in place by dump body tailgate hardware. The FRTS features all steel construction ARC welded throughout. Options are available upon request.

Standard Features

Main agitator extends across full width of spreader. Replaceable without dismantling machine.

Thickness of spread governed by width of gate opening and ground speed of truck.

Hydraulic Motor is high

torque, low speed gerotor type.

FRTS

Replacement Tailgate Spreader

Self Leveling spinner assembly allows spinner disc to remain parallel to road surface, regardless of position of Dump Body.

Urethane Spinner will

not rust or corrode. More effective material dispersal with less waste.

Text Box: Text Box: Dump Bodies
Text Box: Push Frames
Text Box: Wetting Systems
Text Box: Text Box: Home
Text Box: Literature
Text Box: Dealers
Text Box: Warranty
Text Box: Contact Us
Text Box: In Stock
Text Box: Products
Text Box: Snow Plows

Spreaders

FEPTGS5

Poly Tailgate Spreader

Specifications

Weight (empty) - 106 lbs

Capacity - 5.75 cubic feet

Spreading Material - Bagged rock salt

Spreading Width - Up to 40 feet

Wiring Harness - Completely loomed automotive-style, non-combustible with molded plugs.

Speed Control - Digital, self-diagnosing variable speed controller.

Description:

Specially designed for spreading bagged rock salt, the FEPTGS features a 12 volt electric motor mounted directly to a maximum torque transmission in a weather resistant enclosure for dependable performance time and time again. Ideal for maintaining driveways, recreational paths, parking lots and roads. Top screen, cover and a 2” receiver hitch are all included. Save both money and time with a low maintenance, high value poly spreader!

Text Box: Tailgate Spreaders
Text Box: Hopper Spreaders